Church 3 Arm Pendant: Living Room Dining Installation

Quick Answer

Install the Church 3 Arm Pendant by first turning off power, assembling the fixture, wiring it correctly, and mounting it at the right height—about 30-36 inches above a dining table or 7 feet above the floor in a living room. Follow the steps below for a safe and polished installation.

Step-by-Step Installation Guide

1. Turn Off Power and Prepare the Area: Switch off the circuit breaker that controls the existing light fixture. Use a voltage tester to confirm the power is off. Lay down a drop cloth to protect your floor and have a helper ready to assist with the heavy fixture. Never skip the voltage test—even if the switch is off, the circuit may still be live.
2. Remove the Old Fixture and Inspect the Wiring: Unscrew and carefully lower the old fixture. Disconnect the wires, noting the color coding (black to black, white to white, and ground to ground). Inspect the ceiling box to ensure it is securely attached and rated for the pendant's weight. If the ceiling box is loose or not rated for a heavy fixture, reinforce it or replace it before proceeding.
3. Assemble the Church 3 Arm Pendant: Follow the manufacturer's instructions to attach the arms and any decorative elements to the central body. Hand-tighten all screws to avoid stripping. If the fixture includes a canopy, slide it onto the chain or cord before wiring. Assemble on a soft surface to avoid scratching the finish, and keep all small parts in a tray.
4. Wire the Pendant: Connect the fixture wires to the house wiring: black to black (hot), white to white (neutral), and the ground wire to the green or bare copper ground. Use wire nuts and wrap with electrical tape. Tuck the wires carefully into the ceiling box. Double-check that all wire nuts are tight and no bare copper is exposed outside the nut.
5. Mount the Canopy and Secure the Pendant: Lift the pendant and attach the canopy to the ceiling box, securing it with the provided screws. Ensure the pendant hangs straight and the canopy sits flush against the ceiling. Adjust the chain length if necessary to achieve the desired hanging height. Use a level to verify the canopy is even; an uneven canopy can make the whole fixture look tilted.
6. Install Bulbs and Test the Fixture: Screw in the recommended bulbs (check the fixture's wattage rating). Turn the power back on at the breaker and test the switch. If the fixture doesn't light, turn off power and recheck the wiring connections. Always use bulbs within the recommended wattage to prevent overheating and damage to the fixture.
7. Set the Ideal Hanging Height: For a dining room, hang the pendant so the bottom is 30-36 inches above the tabletop. For a living room, aim for at least 7 feet from the floor to the bottom of the fixture. Adjust the chain or cord accordingly. Consider the sightlines from adjacent rooms; the pendant should not obstruct views or doorways.

Product at a Glance

• Church 3 Arm Pendant: An elegant solution for smaller spaces. Custom crafted parts made and polished in Southern California and assembled to order in our Studio. This means the pendant is designed to fit comfortably in compact rooms while offering a premium, hand-finished look that adds character to your space.