How to Install a Double Pivot Chandelier Safely

By Ravenhill Studio | Published: 2026-10-19

Category: How-to Guides

Learn the safe, step-by-step process for installing a Double Pivot Chandelier, including mounting, wiring, and weight considerations.

Quick answer

To install a Double Pivot Chandelier safely, ensure your ceiling box is rated for its weight, turn off power at the breaker, and follow a careful sequence of mounting, wiring, and balancing.

Why weight and ceiling box matter

The Double Pivot Chandelier is a substantial fixture with 10 shades supported by a cord-and-rod armature. Because it is built to order in Los Angeles, it is not a lightweight piece. Most standard ceiling boxes are rated for only 50 pounds, so you must verify that your box can handle the chandelier's weight. If not, you will need to install a fan-rated or heavy-duty box before proceeding.

Another consideration is the pivot mechanism itself. Unlike a static chandelier, the pivot allows the fixture to tilt, which shifts the center of gravity. This makes a secure mount even more critical—any looseness will be amplified when the chandelier is angled.

Step-by-step installation process

Turn off power and gather tools: Switch off the circuit breaker for the room. Have a voltage tester, screwdriver, wire strippers, and a helper ready. Confirm the ceiling box is rated for the chandelier's weight (check the label or consult an electrician). Never skip the voltage test—even after turning off the breaker, confirm no power is present.
Assemble the chandelier on the ground: Unpack and assemble the shades and armature on a clean, soft surface. This reduces strain on your arms and prevents scratches or damage to the finish. Follow the included assembly instructions, but do not tighten all screws yet—leave some play for alignment. Check that all shades are intact before lifting; damaged shades are easier to replace now.
Attach the mounting bracket: Secure the mounting bracket to the ceiling box using the provided screws. Ensure it is level and tight. If the box is recessed, use a flush-mount adapter (if included) to bring the bracket flush with the ceiling. A loose bracket is the most common cause of a wobbly chandelier—double-check tightness.
Lift and connect the wiring: With a helper, lift the chandelier and connect the wires: black to black (hot), white to white (neutral), and green or bare copper to the ground screw on the bracket. Use wire nuts and twist clockwise until snug. Tuck wires neatly into the box. If the chandelier has no ground wire, connect the ground to the bracket—never leave it unconnected.
Hang the fixture and adjust the pivot: Hook the chandelier onto the bracket and secure it with the provided locking mechanism. Adjust the pivot angle to your desired position, then tighten all screws, including the pivot joint. Ensure the fixture hangs level and does not drift. Test the pivot movement after tightening—it should hold position without sagging.
Install shades and bulbs: Attach each shade and install the recommended bulbs (check the fixture label for wattage and type). Use a soft cloth to handle shades to avoid fingerprints. Turn the power back on and test. If any shade sits crooked, re-seat it and tighten the holder—do not force it.

About the Double Pivot Chandelier

Double Pivot Chandelier: Features 10 shades held aloft through a simple armature of cords and rods, custom made for us in Los Angeles. The multiple shades and custom construction mean the fixture is heavier and more complex to handle, so careful lifting and secure mounting are essential.
Double Pivot Chandelier