Peek Pendant Height & Clearance Guide
By Ravenhill Studio | Published: 2026-10-26
Category: How-to Guides
Quick reference for installing your Ravenhill Studio Peek Pendant at the correct height. Covers standard clearance, adjustable drop, and common mistakes to avoid.
Quick answer
Hang your Ravenhill Studio Peek Pendant so the bottom of the shade sits 30 to 36 inches above a dining table or 7 feet above the floor in a walkway. The 9-foot fabric cord lets you adjust the drop to meet these clearances.
Why clearance matters more than style
A pendant that hangs too low blocks sightlines and risks bumping heads; one that hangs too high loses its sculptural presence and casts a weak pool of light. The Peek Pendant's adjustable shade adds another variable: the angle of the shade changes the effective height of the light source, so you need to account for that when measuring.
Step-by-step installation height guide
- 1. Measure your ceiling height: From the ceiling to the floor. The Peek Pendant comes with 9 feet of cord, so for a standard 8-foot ceiling you can use almost all of it. For a 10-foot ceiling you may need to order a longer cord separately. Common mistake: assuming 9 feet of cord works for every ceiling height. It works for up to about 9.5-foot ceilings with a dining table drop.
- 2. Set the dining table clearance: Aim for 30 to 36 inches from the bottom of the Peek Pendant shade to the table surface. If your table is 30 inches tall and your ceiling is 8 feet (96 inches), you have 30 to 36 inches of available drop: (96 - 30) = 66 inches, minus 30 to 36 inches clearance = 30 to 36 inches of cord visible. Checkpoint: if the shade is tilted, the lowest point may be a few inches lower than the center of the shade. Measure from that lowest point.
- 3. Adjust the shade angle last: After setting the cord length, tilt the shade to control the light spread and the final lowest point. A more horizontal shade directs light downward but lowers the bottom edge; a more vertical shade raises it but spreads light wider. Fine-tune the angle before tightening the set screw. Common mistake: setting the cord length before choosing the shade angle, then finding the fixture hangs too low or too high after tilting. Always mock up the final angle first.
Product facts
- Peek Pendant: 9 feet of drop cord provided, made in Los Angeles. You have plenty of cord to reach standard 8- or 9-foot ceilings without ordering extra parts.
Peek Pendant - Peek Pendant: Shades can be adjusted for reach and light intensity. Tilting the shade changes the lowest point of the fixture, so measure from the bottom edge of the shade in its final position, not from the canopy.
